Original Mindray Battery 11.1V 4600mAh Li-ion for ECG-1200/1250 and PM-7000/8000 Series
제품 설명
Mindray Battery 11.1V 4600mAh REF 0146-00-0099
This genuine Mindray battery is primarily compatible with Mindray portable electrocardiographs (ECG-1200/ECG-1250 series) and patient monitors (PM-7000/PM-8000 series). As a Ni-MH rechargeable battery with approximately 600-800 cycle life, it offers high energy density and 4.6Ah capacity, providing at least 8 hours of continuous operation in low-power mode. The ideal power solution for portable medical devices.
Compatible Devices
Portable Electrocardiographs: ECG-1200/1250 Series - Compact, feature-rich devices with built-in printing system, ideal for primary healthcare facilities and home visits.
Basic Vital Signs Monitor: PM-7000/8000/9000 Series - Detects multiple parameters with low power consumption, suitable for inpatient wards and outpatient clinics.
Small Portable Ultrasound: M5/M7 Series (Entry-level) - Simplified functions with half-day battery life, perfect for emergency rooms and rural clinics.
Technical Specifications
Product name
Mindray battery
REF
0146-00-0099
Type
Li-ion
Voltage
11.1V
Capacity
4600mAh
Energy
51.06Wh
Charge time
4-6 hours
Cycle life
≥500 times
Color
Black
Size
160×75×35mm
Weight
About 450g
Frequently Asked Questions
Q1: After charging, the battery only has 80% charge and cannot be fully charged. Is this a battery malfunction?
A1: This is not a battery malfunction. The issue may be caused by insufficient charger power. We recommend using the original charger for optimal performance.
Q2: The battery casing has a slight bulge, is elastic when pressed, and has no leakage. What could be causing this?
A2: This indicates overcharging/over-discharging has caused internal gas production, representing a potential safety hazard. Immediately discontinue use, keep away from heat sources, and contact battery recycling for replacement.
Q3: After installing the battery, the device occasionally loses power when moved. What could be the reason?
A3: This may be caused by worn battery slot clips or slight battery casing deformation. Inspect the battery clips and replace if necessary. If clips appear normal, apply thin adhesive foam to the battery side to improve fit.